EC350102X8A-HA1 encoder

MANUAL ENCODER Encoder,Rotary encoder, shaft encoder, Stable quality and long rotary life Passed ISO9001,ISO14001,

EC35 SERIES Encoder,ROTARY ENCODER ,shaft encoder,SPECIFICATION
1	ELECTRICAL CHARACTERISTICS
	ITEMS					SPECIFICATION
1-1	Power Rating					DC 5V 0.5mA
1-2	Insulation Resistance					More then 10MΩ at DC 50V 1 Minute
1-3	Withstand Voltage					1Minute at AC 50V
1-4	Sliding Noise					≤3mS (Test conditions 360°/S )
						Using the C/R filter circuit  is Recommended.
1-5	Resolution					10Pulses/360° for each phase.
						Output signal is 1 pulse per 2 detents
1-6	Phase-Difference					T=0.25±0.17 T
1-7	Output Signal And Rotational					CCW direction		A Signal		OFF
										ON
	Direction
								B Signal		OFF
										ON
1-8	Working Temperature					-10oC~70oC
1-9	Storage Temperature					-40oC~85oC
2	MECHANICAL CHARACTERISTICS
2-1	Total Rotation Angle					360°
2-2	Rotation Torque					30~200gf.cm.Shaft rotatable at -10oC~+5oC.-10oC~+5oC
2-3	Shaft Push-Pull Strength					10Kgf.cm
2-4	Number and position Detent					20 detents(Step angle: 18°±3°)
2-5	Rotational life					30,000 Cycles Min.at a speed of 600 cycles/H
2-6	Resistance to soldering heat					Manual Soldering:Less than 300 and quicker than 3 seconds.

EC350102X8A-HA1 encoder